The Thermacor Ferro-Therm piping system is factory-fabricated, pre-insulated and ready for installation below or above ground distribution of hot (250ºF) and chill water, low pressure steam, condensate, oil, and viscous fluids.
The system is designed with steel carrier pipe (type and grade specified, as required), polyurethane foam insulation, and a high density polyethylene (HDPE) jacket or a Type 1, Class 1 PVC jacket.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Copper-Therm is a pre-insulated piping system utilizing Type “K,” “L” or “M” (ASTM B-88) copper pipe in sizes 1/2” through 6” as the carrier pipe, polyurethane foam insulation, and a rigid PVC or black HDPE jacket for the underground distribution of hot water, chill water, domestic hot water, low pressure steam, and condensate.
Joints and fittings can be joined using silver solder or brazing alloys melting at or above 1100ºF, or they can be joined using machine-cast bronze couplings with EPDM O-ring seals. The coupling joining method allows for thermal expansion to be taken up in the coupling itself. Therefore, expansion loops or other similar thermal expansion provisions are not necessary.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Chill-Therm is a pre-insulated piping system designed with PVC plastic pressure carrier pipe, polyurethane foam insulation, and an HDPE or PVC plastic jacket for the underground distribution of chilled water.
The plastic carrier pipe may be Class 160 (SDR 26), Class 200 (SDR 21), C900/905, Schedule 40, or Schedule 80 PVC as required.
Chill-Therm is the most economical choice available for chill water distribution systems.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Figer-Therm 250 is a pre-insulated piping system designed with fiberglass-reinforced plastic pressure carrier pipe, polyurethane foam insulation, and an HDPE or PVC plastic jacket for the distribution of chilled water, low temperature hot water, steam, and condensate up to 250ºF.
The fiberglass pipe in the 250 System is rated at 150 psi max. To prevent fiberglass pipe from being subjected to steam damage, flash tanks or other piping arrangements should be used at high pressure drip points.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Ferro-Therm D.I. is a pre-insulated piping system that is cement-lined with sealcoat, pressure class 50 or 51, gasketed ductile iron (D.I.) pipe with polyurethane foam insulation, watertight end seals, and a rigid PVC or black HDPE jacket for distribution of chilled water.
For hot water applications, Thermacor can provide a pre-insulated piping system that is cement-lined (without sealcoat), pressure class 50 or 51, EPDM gasketed ductile iron pipe with polyurethane foam insulation, watertight end seals, and a rigid PVC or black HDPE jacket.
Ferro-Therm D.I.’s bell-and-spigot joining method allows for thermal expansion to be taken up in the bell end of the joint, making expansion loops and other thermal expansion provisions unnecessary.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Polycor is a completely pre-insulated piping system designed with black high density polyethylene (HDPE) plastic carrier pipe, polyurethane foam insulation, and covered with a black HDPE jacket for the distribution of chilled water, sewer, water main, force main, waste heat, etc.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.
Thermacor Steel-Therm is a factory pre-insulated piping system created by combining our popular Ferro-Therm line with ductile iron couplings to seal the joints between lengths of pipe. The D.I. couplings, utilizing two EPDM rubber gaskets, eliminate welding and provide compensation for expansion and contraction, thereby eliminating the need for expansion loops or expansion joints.
To learn more, click here to contact JW SoCal Sales or simply call us at 951-312-2229.